The worldwide standard ® Custom Power Systems
 
InterActive®  CHARGING SYSTEMS
The InterActive 2000 system includes a complete family of high performance charger products from the full featured
PowerChargers to the economical performance of the new T series. All InterActive chargers communicate with
Anton/Bauer InterActive batteries to provide safe, reliable performance from the battery system.  Service life is extended. And old myths of "memory" are totally eliminated.

The InterActive 2000 PowerChargers deliver all the advancements and proven reliability of InterActive® charging plus
the ability to power a camera from AC mains. The unprecedented value and unique features of the PowerCharger system
has redefined the standard of power for all video operations - from individual videographers to the largest broadcast
operation. All PowerChargers feature the MAXX III Warranty.
The Quad 2702 and Dual 2722 standard features are: a Multifunction LCD which indicates charge status, available capacity, battery type/rating, and with Digital Batteries, percent of maximum charge, battery serial number, date of manufacture,
number of charge/discharge cycles accumulated, present battery temperature and voltage. Also displays capacity test data via the standard diagnostic discharge module. DC output for camera operation from AC mains in both models.

1-Ready     (Secondary)    6.2
Dionic 90      95%       16.5V

1-Ser# 5065    April 03         6.3
132 cycles      Imin          23°C

Information available with Digital Batteries
The T series offers InterActive charging in economical and versatile performance packages. The TANDEM 70
is a combination Snap-On® camera power supply and a single position charger. The TWIN simultaneously
chargers any two Anton/Bauer batteries in a small lightweight package perfect for travel. The TWQ offers
simultaneous charging in a lightweight four position unit. T2 charger combines independent two channel simultaneous charging with a 70 watt DC output for operating virtually any camera from AC mains.

All Anton/Bauer chargers meet applicable safety and emissions standards including FCC and CE.
  Charge
Positions		 LCD
Display		 Camera DC
Power		 Diagnostic
Module (DDM		 Type of
Charge		 Nominal Charge Time (Hours)
Dionic160 Dionic90 HyTron120 ProPac HyTron50 Trimpac
Quad 2702 4 Std. 70W Std. Sequential 3 1/2 3 2 1/2 1 2 1
TWQ 4 N/A N/A N/A Simultaneous 8 1/2 5 1/2 6 1/2 3 1/2 3 2
Dual 2722 2 Std. 70W Std. Simultaneous 3 3/4 3 2 1/2 1 2 1
T2 2 N/A 70W N/A Simultaneous 4 1/2 3 2 1/2 1 2 1
Twin 2 N/A N/A N/A Simultaneous 8 1/2 5 1/2 6 1/2 3 1/2 3 2
Tandem 70 1 N/A 70W N/A N/A 4 1/2 3 2 1/2 1 2 1
* Sequential chargers will charge each battery in the same time shown one after another.  Simultaneous chargers will charge all batteries in the time shown at the same time.
Anton/Bauer, Inc. (Headquarters)
14 Progress Drive
Shelton, CT 06484 USA
 
Tel:  203-929-1100
       800-422-3473
         (Toll Free in US)
Fax: 203-925-4988

 

 Anton/Bauer Europe, B.V.
Eurode Park 1
6461 KB Kerkrade
The Netherlands

Country of Origin- The Netherlands
Company Number:14071545
VAT Number: NL8100.22837.B01

Tel:  +31-45-5639220
Fax: +31-45-5639222

 Anton/Bauer (Singapore contact)
6 New Industrial Road
#02-02 Hoe Huat Industrial Building
Singapore 536199

Tel:  +65-6297-5784
Fax: +65-6282-5235

 
Anton/Bauer (France contact)
7,Bd Marcel Pourtout
92500 Rueil Malmaison
 
Tel: +33 (0)6 14 25 79 26
       +33 (0)1 78 12 02 16
Fax:+33 (0)1 78 12 02 26

 
Copyright © 1995-2007 Anton/Bauer Inc.
All Rights Reserved Worldwide