The innovative ElipZ 10k brings
unmatched power density to handheld 7.2 volt battery
operated cameras. Using the highest capacity lithium ion cells
available, the 75Wh 10k can provide
runtimes as much as 2 to 5 times that
of the consumer OEM batteries supplied with the cameras. On a 10
watt camera load, the 10k will run over 7 1/2 hours, virtually a
full shooting day! State indicator LEDs give a simple and easy to
understand and constant indication that the battery has usable
capacity (Blue) or requires charge (yellow).
Constructed of high impact
polycarbonate the ELIPZ 10K innovative under-camera
mounting
design
allows batteries to be easily mounted and released with one hand.
A quick release "shoe" attaches to the camera and the battery
attaches directly and securely to the shoe.
Lowering the center of gravity of the
camera and providing an additional handhold without interfering
with the camera operation, the lightweight ElipZ battery actually
improves the comfort and handling characteristics of the camera.
The appropriate adapter cable connects directly to the camera
battery compartment and plugs into the
PowerPlug connector on the ElipZ 10K.
The
ElipZ 10K mounts easily to the EgripZ support, or other camera
support using the metal 1/4 20 insert at the bottom of the
battery. The unique ElipZ power connector accepts both the camera
adapter plug and the ElightZ PowerPlug. The 10k is capable at
continuous loads of up to 6 amps - more than enough for a camera
and light simultaneously.
ELIPZ 10K BATTERY
75Wh lithium ion battery (10,500 mAh @7.2V) - requires one of the
following cables for your specific camera type. 6.4" X 3.2" X 1.7"
(16.3 X 8.0 X 4.3 cm) 1.25lbs (567grams)
ELIPZ cable adapters:
Model SI-ADP-ELPZ. ElipZ Adapter for Sony
PD-100/150/170, DCRVX2000/2100, HDR-FX7
Model SH-ADP-ELPZ. Elipz Adapter for Sony HVR-ZIU, HVR-VIU,
HDR-FX1
Model CA-ADP-ELPZ. ElipZ Adapter for Canon GL1/2, XM2, XH-AI,
XH-GI
Model PA-ADP-ELPZ. ElipZ Adapter for Panasonic AGHVX200,
AJDVX100/100A/100B/101/102, DVC80/30
ELIPZ CHARGER The
ElipZ battery charger weighs only 14 oz yet has the power to
charge the ELIPZ 10K in as little as 6 hours. Simply plug the
charger into the PowerPlug connector on the battery and the
charger will automatically begin its charge routines. LEDs give
easy to understand charge mode indication and features wide range
(100-240 VAC 50/60 Hz) mains input. Desktop design allows for easy
travel and storage. 5.4" X 3.1" X 2.2" (13.7 x 7.8 x 5.5 cm)
Weight: .95lbs.(420 grams)
ELIPZ 10K PACKAGE contains
(1) ELIPZ 10k battery and (1) ElipZ charger.
NOTE: Requires appropriate ELIPZ Cable Adapter as shown
above.
ELIPZ System Accessories
These accessories will help to make
the most out of your handheld camera by complementing the new
ElipZ, EgripZ and ElightZ.
HUBZ
accessory base- is an original
approach to the problem of accessory mounting on small handheld
cameras. Its rigid-yet-flexible SpokeZ ( arms ) can be formed in
any position to optimize the positioning of audio recievers,
hard drives, monitors-or just about anything you want handy
during a shoot.HubZ mounts easily to any camera via the 1/4-20
mounting and can sandwich between the ElipZ battery, beneath it,
or simply used alone. 1/4-20 mounting on the bottoms of the HubZ
allows it to be mounted on any standard camera support. Comes
with one SpokeZ which can mount in any one of four positions in
the HubZ. Can be easily disassembled for packing in camera case.
Size: 4" x 2.85" x .85" (10.16 x
7.24 x 2.16 cm) Weight: .25 lb (10kg.)
SpokeZ
additional arms for HubZ accessory
base. SpokeZ flex-rigid material allows forming for optimal
location without bouncing out of position during operation. Each
SpokeZ features an attachment face that provides a number of
ways to secure a hard drive, audio receiver or other device and
comes with double-sided hook-and-loop strap, adhesive
hook-and-loop.12' arm with 3.25" x 3.2" x .63" (8.25 x 8.25 x
1.6cm) multi point attachment face. Weight: .15 lb (.08 kg )
EZ-C70P Backplate for
mounting the ElipZ 10K battery onto the Panasonic AVCHD camera.
(shown with optional wireless mounting plate)
ELIPZ MOUNTING SHOE Spare
ELIPZ mounting shoe
ELIGHTZ WIDE ANGLE ADAPTOR replacement
bezel for ElightZ with wide angle glass to double beam spread. Softens light
output by about 1 stop.
Links to more information:
- ElightZ Professional Handheld
Camera Fill Light
- EgripZ Handheld Camera Support
- ElipZ Product
Reviews
